Repairable Targets
Targets are field-repairable with the Assembly Guidance Target Repair Kit
LASERGUIDE uses 4 to 24 retro-reflective targets on the tool per projector to establish the location of the tool relative to each laser projector.
Typical Targets are 0.50" diameter with a 0.1" or 0.2" diameter in retro-reflective spot centered at the top face.
Target repair is much more cost-effective than purchasing replacement targets, providing additional long-term savings.
Additional targets are available in standard metric units or custom dimensions, as required by the tool.
- Type Options: 0°, 45°, or 90°
- Offset Options (Height): 0.3125" or 0.5"
- Spot Size Options: 0.1", 0.2" or 0.5"